Granite Polishing Cost in Dubai: What Shapes Your Quote
The cost of granite polishing in Dubai is set by four things: how many square meters (or linear meters) you have, what condition the surface is in, which finish you want, and whether repairs and sealing are part of the job. A granite floor that has only lost its shine needs far less work than one with scratches, etched spots, chipped edges and open joints, so two quotes for the same villa can differ widely without either being wrong. This guide shows how quotes are built, what to ask for in writing, and how to compare estimates so you pay for the work your stone needs.
It is written for people who own or manage granite in Dubai: villa and apartment owners, property and facility managers, hotels, offices, retail units, and the contractors and designers who specify the work.
TL;DR
-
Granite polishing is usually priced per square meter for floors and per linear meter or per piece for countertops, stairs and edges. The rate depends on the work, not on the stone alone.
-
Condition is the biggest swing factor. Light dullness needs polishing only. Deep scratches, lippage (uneven tile edges) and etching need grinding or honing first, which adds labor.
-
Repairs, grout work and sealing are often separate lines. Ask whether each one is inside the quote.
-
A written quote should name the area, the steps, the finish, the sealer and the protection of furniture and neighboring surfaces.
-
To get a price for your own granite, send the area, a few photos and the use of the space to our team through the granite page.
Table of Contents
How granite polishing is priced in Dubai
There is no single “granite polishing price” in Dubai, because providers price different scopes under the same name. You will see three quoting styles.
Per square meter. This is the common method for floors in villas, apartments, lobbies, corridors and retail areas. The rate multiplies by the measured area. It is easy to compare only when the scope behind the rate is identical.
Per linear meter or per piece. Countertops, vanity tops, window sills, stair treads and risers, and edge profiles are measured by length or counted as items. Small items often carry a minimum charge because setup takes the same time whatever the size.
Lump sum. For a whole property or a phased commercial project, a provider may give one figure for a defined scope. A lump sum works well when the scope is written out. It is hard to judge when it is not.
Notice that a very low per-square-meter figure quoted over the phone can describe a single light buffing pass, while a higher figure may describe a full multi-step diamond process with repairs and sealing. The number alone tells you very little. The scope tells you everything.
What drives the price up or down
Area and layout
Larger areas usually cost less per square meter than small ones, because setup, protection and travel are spread across more surface. A single 12 sqm entrance hall is not priced like a 400 sqm villa ground floor. Layout matters too: many small rooms, narrow corridors, columns and built-in furniture slow the machines and increase hand work along the edges.
Current condition of the stone
This is where most price differences come from. Granite is a hard natural stone and holds its finish well, but Dubai’s conditions still take a toll: fine sand tracked in from outside acts like sandpaper on the surface, heavy foot traffic dulls walkways, and harsh cleaners can leave a film. Typical conditions, from lightest to heaviest:
-
Dull but flat. The surface has lost its gloss from traffic and cleaning residue. Polishing and a protective step may be enough.
-
Scratched or hazy. Visible swirl marks and scuffs need coarser diamond abrasives first, then finer ones to bring back the shine.
-
Stained or etched. Stains need to be treated based on what caused them. Etching, which is damage from acidic substances, needs the surface to be worked back to an even level.
-
Uneven or damaged. Lippage, chips, cracks and failed grout joints need repair or filling before any polishing, and that is a different job from polishing.
The heavier the condition, the more passes, time and consumables the job takes, and the higher the quote.
Finish you want
Granite can be left at a high-gloss polish, a satin or honed look, or a more matte surface. A mirror-like gloss takes the finest abrasive stages and more time. A honed finish stops earlier and is often chosen for areas where slip resistance and a softer look matter, such as around pools, terraces and bathrooms. Decide the finish before you ask for prices, because it changes the scope.
Repairs, grout and joints
Filling chips, closing hairline cracks, and re-doing grout are not part of polishing in the strict sense. If your floor needs them, they should appear as separate line items. Our page on tile grout restoration explains how that part of a job works.
Sealing and protection
After polishing, a sealer helps the stone resist staining and makes everyday cleaning easier. Whether it is included, and what kind of sealer is used, affects the total. If you want to understand what sealing does and when it is worth it, read our granite sealing guide for Dubai homes.
Access, working hours and site conditions
Commercial sites often need night or off-peak work so that the space reopens on time. Apartments in high-rise towers may need lift booking, building approvals and limited working windows. Properties with stairs, split levels, or heavy furniture to move add time. A hotel lobby that must stay operational during the day is planned very differently from an empty villa.
Polishing, grinding, honing and restoration: what each means for cost
Quotes get confusing because these words are used loosely. Here is a plain way to read them.
| Term | What it does | When it is needed |
|---|---|---|
| Cleaning | Removes dirt and residue, no change to the stone surface | Light soiling, before any other step |
| Polishing | Restores gloss using progressively finer diamond abrasives | Dull but undamaged granite |
| Honing | Smooths the surface to a satin finish | Light scratches, or when a low-sheen look is wanted |
| Grinding | Removes a thin layer to level the surface and clear deep marks | Lippage, deep scratches, etching |
| Restoration | A full program that can combine repair, grinding, honing, polishing and sealing | Heavily worn or damaged floors |
A provider quoting “polishing” for a floor that actually needs grinding will either deliver a disappointing result or come back with extra charges. Asking which of these steps your floor needs, and why, is the simplest way to understand a quote. Our explanation of marble polishing versus marble grinding uses marble as the example, but the logic of choosing the step is the same for granite, and our diamond polishing process page walks through the stages.
A worked example of how a quote adds up
Take a villa with a granite entrance and living area of 120 sqm, a staircase of 14 steps, and a granite kitchen countertop of 3 linear meters. A clear quote would be organized like this:
| Line | Basis | Question to ask |
|---|---|---|
| Floor polishing, 120 sqm | Area × rate per sqm | Which steps are inside this rate? |
| Grinding of uneven areas | Area affected or lump sum | Which areas, and why? |
| Staircase, 14 steps | Per step or per linear meter | Are risers and edges included? |
| Countertop, 3 linear meters | Per linear meter | Are edges and the sink area included? |
| Chip and joint repair | Per item or lump sum | How many repairs are expected? |
| Sealing | Area × rate | Which sealer, and how many coats? |
| Protection and cleanup | Included or separate | Is furniture moved, and who does it? |
The total is the sum of these lines. If a competing quote has one number for everything, ask for it to be broken into the same lines. Without that, you are comparing a price with a price list.
If you own several units, the same logic applies at scale. A developer or property manager handling a handover or a lease turnover should ask for a rate card by area type (lobby, corridor, apartment interior, stairs) so that every unit is priced on the same basis.
How to compare granite polishing estimates
Use these checks when you hold two or three quotes in your hands.
-
Same area, measured the same way. Ask whether the quote is based on your own measurement or on the provider’s. A difference in area is the quickest way for two quotes to diverge.
-
Same steps. Count the stages: cleaning, grinding or honing, polishing, sealing. A quote that skips a stage is cheaper for a reason.
-
Same finish. High gloss, satin and honed finishes are different jobs.
-
Repairs listed. Chips, cracks, grout and joints should be listed or clearly excluded.
-
Sealing stated. Is a sealer applied, and is it part of the price or an add-on?
-
Protection and cleanup. Dust and slurry control, protection of walls, doors and furniture, and removal of waste should be written down.
-
Timeline and access. How many days, what hours, and what the property must do before the team arrives.
-
Equipment and team. Professional diamond systems and trained operators are the difference between an even finish and visible swirl marks.
-
Payment terms. What is due before, during and after the work, and whether the quote is itemized.
A price that is far lower than the rest is usually missing something from this list. A price that is far higher should be able to explain which line is responsible.
What owners in different property types should expect
Villas and penthouses. Large continuous granite areas, stairs, and outdoor-facing entrances are typical. Owners usually value a uniform finish across rooms and a result that holds up against sand and daily use. A single full-scope quote with protection and sealing is generally the cleanest approach.
Apartments and holiday homes. Smaller areas, building access rules and turnaround between guests matter more. Ask about working hours and how fast the floor can be used again after sealing.
Hotels, resorts and hotel apartments. Lobbies, corridors and restaurants need phased work in off-peak hours, with sections reopened as they are finished. Quote by zone, so that you can approve each phase.
Offices, retail and commercial buildings. Plan around opening hours and foot traffic. A maintenance program after restoration keeps the floor in condition and spreads cost over time. Our granite floor maintenance tips for Dubai homes cover the daily routine that protects a polished surface.
Contractors, designers and developers. Specify the finish and the sealing standard in the scope, and ask for itemized rates so variations can be priced fairly.
If your property also has marble, the same quoting approach applies, and our marble polishing cost page shows how we describe pricing for that stone.
Why restoring granite beats replacing it
Granite is a durable stone. When it looks tired, the surface is usually what has worn, not the slab. Replacement means removing the old stone, buying new material, installation labor, waste removal and weeks of disruption. Restoration works on the stone already in place, and for most worn granite floors, countertops and stairs, it brings back the look the owner originally paid for without that disruption. That is why asking for a restoration quote before a replacement quote is a sound first step.
Our perspective
When owners ask us about granite polishing cost, the useful answer is never a single number. The useful answer is a scope.
Granite is a hard stone, and that is its strength. It also means the result depends on the diamond system, the sequence of abrasives and the skill of the operator. We work with professional-grade equipment and diamond polishing systems, and we tailor the work to each floor type and each property, because a villa floor and a hotel lobby do not need the same plan.
Our view is simple: look at the floor first, decide the right steps (polishing alone, or honing, grinding, repair and sealing), and write them down. When the scope is clear, the price is fair to both sides and there are no surprises on the day.
We also prefer restoration to replacement. Restoring the stone you already have protects the value of the property and avoids the cost and mess of tearing out good material.
Qadir
Get a quote for your granite
Our team restores granite floors, stairs and countertops across Dubai, for homes and commercial properties alike, with grinding, honing, polishing and sealing tailored to the stone and the property. Granite work is listed on our natural stone, terrazzo and granite restoration page, where you can request a quote. Send the area, a few photos of the surface and a note on how the space is used, and we will describe the scope your floor needs. For other floor types, see our full list of floor services.
FAQ
How is granite polishing usually priced in Dubai?
Floors are typically priced per square meter, while countertops, stairs and edges are priced per linear meter or per piece. Some projects are quoted as a lump sum for a defined scope. Whatever the method, ask for the steps, finish, repairs and sealing to be listed so quotes can be compared.
Why do two granite polishing quotes differ so much?
Usually the scope differs. One quote may cover a single polishing pass, while another includes grinding, repairs, polishing and sealing. Differences in measured area, finish and protection of the property also change the total. Ask both providers to break the price into the same lines.
Is polishing granite the same as restoring it?
No. Polishing brings back gloss on a surface that is basically sound. Restoration is a broader program that can include grinding or honing to level the stone, repairing chips and joints, polishing and sealing. A site assessment shows which one your floor needs.
Does sealing cost extra after polishing?
It can, depending on how the quote is written. Some providers list sealing as a separate line, others include it. Check that the quote states whether a sealer is applied and what it is, since sealing helps protect the polished surface from stains in daily use.
How can I get an accurate price for my granite floor?
Give the provider the measured area, photos of the worst areas, the finish you want and how the space is used. With that information, a written, itemized quote is possible. You can send those details to us through our granite restoration page.


